Physics, 20.09.2020 05:01, Marley3082

1. The speed limit on a particular freeway is 28.0 m/s (about 101 km/hour). A car that is merging onto the freeway is capable of accelerating at 2.25 m/s2. If the car
is currently traveling forward at 13.0 m/s, what is the shortest amount of time it
could take the vehicle to reach the speed limit? How far would the car travel in
this time?

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 19:30, Jazminfun70

Density of salty water as compared to the density of pure water is(a) is less(b) is always equal(c) is always more(d) may be less or more

Answers: 1

continue

Physics, 22.06.2019 00:40, camco301

Electroplating is a way to coat a complex metal object with a very thin (and hence inexpensive) layer of a precious metal, such as silver or gold. in essence the metal object is made the cathode of an electrolytic cell in which the precious metal cations are dissolved in aqueous solution. suppose a current of 480.ma is passed through an electroplating cell with an aqueous solution of agno3 in the cathode compartment for 46.0 seconds. calculate the mass of pure silver deposited on a metal object made into the cathode of the cell. round your answer to 3 significant digits. also, be sure your answer contains a unit symbol. ×10μ

Answers: 3

continue

Physics, 22.06.2019 01:30, kaylin28

Astone is dropped with no initial velocity from the top of a cliff and hits the ground a time of 3.9 s later. what is the height of the cliff, in units of meters? you may assume that air resistance is negligible. give the answer as a positive number question 15 a figure skater is rotating at a rate of 200 revolutions per minute. what is the angular speed, in units of rad/s? 200 o 20.9 12000 o 3.33

Answers: 2

continue

Physics, 22.06.2019 03:30, zahradawkins2007

As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.

Answers: 3

continue

Do you know the correct answer?

1. The speed limit on a particular freeway is 28.0 m/s (about 101 km/hour). A car that is merging o...