Physics
Physics, 05.09.2020 06:01, kaylee0424

A jet taxiing down the runway receives word that it must return to the gate. The jet is traveling 39.3 m/s when the pilot receives the message. What is
the acceleration of the plane if it takes the pilot 5.30 s to bring the plane to a halt?

answer
Answers: 3

Other questions on the subject: Physics

image
Physics, 21.06.2019 17:30, TropicalFan
How does convection affect our atmosphere? our layers of earth? our oceans?
Answers: 3
image
Physics, 21.06.2019 23:30, asco0317p34v1s
Classify the following soils according to the uscs classification system. provide appropriate uscs designations. a) this sample of well-graded gravel with sand was obtained from a large earthen dam in vancouver, canada. the sample has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand and 2% fines. the maximum size of the particles is 75 mm. the coefficient of curvature is 2.7, while the uniformity coefficient is 12.4. b) this dark brown and wet soil with a “strong organic odor” has 100% passing the no. 200 sieve. the liquid limit of the material is 32% when not dried and is 21% when oven-dried. the plastic index is 21% when not dried. c) this sand has 61% predominantly fine sand, 23% silty fines, and 16% fine sub-rounded gravel size. the maximum size is 20 mm. the liquid limit is 33% and the plastic limit is 27%. d) this soil has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. the liquid limit is 37% when not dried and is 26% when oven dried. the plastic index is 6% when not dried.
Answers: 1
image
Physics, 22.06.2019 00:00, morgaaaan3835
Suppose that recording station n is located 200 km north of the epicenter of an earthquake, and recording station s is located 100 km south of the epicenter of the same earthquake. which of the following statements would be true?
Answers: 2
image
Physics, 22.06.2019 00:40, naomicervero
The rigid beam is supported by the three suspender bars. bars ab and ef are made of aluminum and bar cd is made of steel. if each bar has a cross-sectional area of 450 mm2, determine the maximum value of p if the allowable stress is (σallow)st = 200 mpa for the steel and ( σallow)al = 150 mpa for the aluminum. est = 200 gpa and eal = 70 gpa.
Answers: 1
Do you know the correct answer?
A jet taxiing down the runway receives word that it must return to the gate. The jet is traveling 3...

Questions in other subjects:

Konu
Mathematics, 27.04.2021 21:00
Konu
Mathematics, 27.04.2021 21:00
Konu
Chemistry, 27.04.2021 21:00