A 2.0 moles of a monatomic ideal gas expands isothermally from state a to state b, Pa = 600 Pa, Va = 3.0 m3, and Vb = 9.0 m3. a. Determine the pressure Pb.
b. Determine the work done on the gas during the process ab.
c. Determine the change in internal energy of the gas during the process ab.
d. Determine the heat transferred to the gas during the process ab.

F500 j of energy were added to 1 kg of each of these samples, which would experience the least temperature increase?

A110-pound person pulls herself up 4.0 feet. this took her 2.5 seconds. how much power was developed? 0.13 hp 0.32 hp 2.0 hp 3.1 hp

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)