Physics, 17.07.2020 19:01, avision42

A mass of 1 slug is suspended from a spring whose spring constant is 9 lb/ft. The mass is initially released from a point 1 foot above the equilibrium position with an upward velocity of Ï3 ft/s. Find the times at which the mass is heading downward at a velocity of 3 ft/s.

Answers: 2

Show answers

Answers

answered: cireland

t = 5π/18 + 2nπ/3 or π/6 + 2nπ/3 where n is a natural number

Explanation:

To solve the problem/ we first write the differential equation governing the motion. So,

$m\frac{d^{2} x}{dt^{2} } = -kx \\ m\frac{d^{2} x}{dt^{2} } + kx = 0\\\frac{d^{2} x}{dt^{2} } + \frac{k}{m} x = 0$

with m = 1 slug and k = 9 lb/ft, the equation becomes

$\frac{d^{2} x}{dt^{2} } + \frac{9}{1} x = 0\\\frac{d^{2} x}{dt^{2} } + 9 x = 0$

The characteristic equation is

D² + 9 = 0

D = ±√-9 = ±3i

The general solution of the above equation is thus

x(t) = c₁cos3t + c₂sin3t

Now, our initial conditions are

x(0) = -1 ft and x'(0) = -√3 ft/s

differentiating x(t), we have

x'(t) = -3c₁sin3t + 3c₂cos3t

So,

x(0) = c₁cos(3 × 0) + c₂sin(3 × 0)

x(0) = c₁cos(0) + c₂sin(0)

x(0) = c₁ × (1) + c₂ × 0

x(0) = c₁ + 0

x(0) = c₁ = -1

Also,

x'(0) = -3c₁sin(3 × 0) + 3c₂cos(3 × 0)

x'(0) = -3c₁sin(0) + 3c₂cos(0)

x'(0) = -3c₁ × 0 + 3c₂ × 1

x'(0) = 0 + 3c₂

x'(0) = 3c₂ = -√3

c₂ = -√3/3

So,

x(t) = -cos3t - (√3/3)sin3t

Now, we convert x(t) into the form x(t) = Asin(ωt + Φ)

where A = √c₁² + c₂² = √[(-1)² + (-√3/3)²] = √(1 + 1/3) = √4/3 = 2/√3 = 2√3/3 and Ф = tan⁻¹(c₁/c₂) = tan⁻¹(-1/-√3/3) = tan⁻¹(3/√3) = tan⁻¹(√3) = π/3.

Since tanФ > 0, Ф is in the third quadrant. So, Ф = π/3 + π = 4π/3

x(t) = (2√3/3)sin(3t + 4π/3)

So, the velocity v(t) = x'(t) = (2√3)cos(3t + 4π/3)

We now find the times when v(t) = 3 ft/s

So (2√3)cos(3t + 4π/3) = 3

cos(3t + 4π/3) = 3/2√3

cos(3t + 4π/3) = √3/2

(3t + 4π/3) = cos⁻¹(√3/2)

3t + 4π/3 = ±π/6 + 2kπ where k is an integer

3t = ±π/6 + 2kπ - 4π/3

t = ±π/18 + 2kπ/3 - 4π/9

t = π/18 + 2kπ/3 - 4π/9 or -π/18 + 2kπ/3 - 4π/9

t = π/18 - 4π/9 + 2kπ/3 or -π/18 - 4π/9 + 2kπ/3

t = -7π/18 + 2kπ/3 or -π/2 + 2kπ/3

Since t is not less than 0, the values of k ≤ 0 are not included

So when k = 1,

t = 5π/18 and π/6. So,

t = 5π/18 + 2nπ/3 or π/6 + 2nπ/3 where n is a natural number

answered: Guest

lower, it's not as dense as chocolate syrup.

choco syrup is more like a solid than a liquid and even turns solid if it gets slightly cold,

orange juice however is a 95% liquid and has a very low viscosity

answered: Guest

here we know that ball will drop down by total distance 3.2 m

so here we know that

$v_{yi} = 0$

$\delta y = - 3.2 m$

now using kinematics

$\delta y = v_{yi} t + \frac{1}{2}at^2$

$-3.2 = 0 -\frac{1}{2}(9.8) t^2$

$t = 0.81 s$

now in the same time it will cover horizontal distance of 0.75 m

$\delta x = 0.75m$

so speed of the ball will be

$v = \frac{delta x }{\delta t}$

$v = \frac{0.75}{0.81} = 0.93 m/s$

Other questions on the subject: Physics

Physics, 22.06.2019 09:30, officialariana01

In a heat engine if 1000 j of heat enters the system the piston does 500 j of work, what is the final internal energy of the system if the initial energy was 2000 j? 1. write the equation 2.list out your known variables 3.plug the numbers into the equations 4.solve 5.write your solution statement that includes initial energy and final

Answers: 3

continue

Physics, 22.06.2019 10:30, jdkrisdaimcc11

What are two different ways you could find the value of a? explain these methods.

Answers: 2

continue

Physics, 22.06.2019 12:00, angelamirga332

Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.

Answers: 1

continue

Physics, 22.06.2019 16:40, byers024

Atriangle with equal sides of length 10 cm has -2.5-nc charged objects at each corner. part a determine the direction of the electrical force exerted on the object at the top corner due to the two objects at the horizontal base of the triangle. determine the direction of the electrical force exerted on the object at the top corner due to the two objects at the horizontal base of the triangle. horizontally rightward vertically downward vertically upward horizontally leftward

Answers: 1

continue

Do you know the correct answer?

A mass of 1 slug is suspended from a spring whose spring constant is 9 lb/ft. The mass is initially...