Physics
Physics, 14.07.2020 01:01, kellypechacekoyc1b3

A 215-kg load is hung on a wire of length of 3.60 m, cross-sectional area 2.00 10-5 m2, and Young's modulus 8.00 1010 N/m2. What is its increase in length

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 21:30, gabrielolivas59
The earth remains in orbit around the sun due to the force of gravity. how does the force of gravity exerted by the sun on the earth compare to the force of gravity exerted by the earth on the sun?
Answers: 1
image
Physics, 22.06.2019 19:30, rprest00
Amass m = 74 kg slides on a frictionless track that has a drop, followed by a loop-the-loop with radius r = 18.4 m and finally a flat straight section at the same height as the center of the loop (18.4 m off the ground). since the mass would not make it around the loop if released from the height of the top of the loop (do you know why? ) it must be released above the top of the loop-the-loop height. (assume the mass never leaves the smooth track at any point on its path.) 1. what is the minimum speed the block must have at the top of the loop to make it around the loop-the-loop without leaving the track? 2. what height above the ground must the mass begin to make it around the loop-the-loop? 3. if the mass has just enough speed to make it around the loop without leaving the track, what will its speed be at the bottom of the loop? 4. if the mass has just enough speed to make it around the loop without leaving the track, what is its speed at the final flat level (18.4 m off the ground)? 5. now a spring with spring constant k = 15600 n/m is used on the final flat surface to stop the mass. how far does the spring compress?
Answers: 3
image
Physics, 22.06.2019 22:00, crystalclear99
Agirl throws a ball. if the ball's acceleration is 12 m/sec/sec and its mass is 0.5 kg, how much force did the girl apply to the ball?
Answers: 1
image
Physics, 22.06.2019 22:50, mdg5605
The illuminance of a surface varies inversely with the square of its distance from the light source. if the illuminance of a surface is 120 lumens per square meter when its distance from a certain light source is 6 meters, by how many meters should the distance of the surface from the source be increased to reduce its illuminance to 30 lumens per square meter?
Answers: 3
Do you know the correct answer?
A 215-kg load is hung on a wire of length of 3.60 m, cross-sectional area 2.00 10-5 m2, and Young's...

Questions in other subjects:

Konu
Mathematics, 28.09.2020 08:01