Cut a 7-inch-diameter circle out of card stock. Draw a spiral on the circle as shown. Next, use the scissors to cut along the lines you drew starting on the outside and ending in the center. Use the hole punch or scissors to make a hole at the middle of the spiral and attach the thread with a knot. Tie the other end of the thread loosely around the center of the stick so you can suspend the spiral in the air. Fill the pot with 2 inches of water. Heat the water until it boils, and then turn off the heat source. Let the pot sit for 4 minutes. Holding the ends of the stick with the spiral attached, position the bottom of the spiral right above the top of the pot so it’s not touching the water. Describe what happens.

this is a good question! i'll do some research and come back when i have the answer!

the working equation for the angular size is the product of the physical size and 360 degrees divided by the product of two pi and distance from earth. the minimum size would be 0.559 degrees while the maximum size would be 0.49 degrees. 

d₁ = displacement of tern from arctic to antarctic = 11000 miles

d₂ = displacement of tern from antarctic to arctic =   - 11000 miles

d = total displacement for the journey

total displacement for the journey is given as

d = d₁ + d₂

d = 11000 + (-11000)

d = 0 miles

t₁ = time of travel from arctic to antarctic = 3 months = 3 x 30 days = 90 days

t₂ = time of travel from antarctic to arctic = 3 months = 3 x 30 days = 90 days

t = total time of travel

total time of travel is given as

t = t₁ + t₂

t = 90 + 90

t = 180 days

average velocity is given as

average velocity = total displacement/ total time

v = d/t

v = 0/180

v = 0 miles/day