Remy wonders if the height of the mountain has anything to do with the eventual size of the tsunami wave. How should Remy test this? A. Cause avalanches on several different mountains and see how large each resulting tsunami is. B. Build different-sized model mountains at the edge of a pool, pour sand down the side of each mountain, and see how large each resulting wave is. C. Pour different amounts of sand down the side of a model mountain into a pool and see how large each resulting wave is. D. Build a model town at the edge of a pool and see how large waves must be to cause damage to the buildings.

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i. e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?