A machine can be 100% efficient because some work is always lost do to

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Why are graphs useful when interpreting data

Steelhead trout migrate up stream to spawn. occasionally they need to leap up small waterfalls to continue their journey. fortunately, steelhead are remarkable jumpers, capable of leaving the water at a speed of 8.0 m/s. a. what is the maximum height a steelhead trout can jump? b. leaving the water at 8.0 m/s, the trout lands on top of the water fall 1.8 m high. how long was it in the air?