In a plate glass factory, sheets of glass move along a conveyor belt at a speed of 15.0 cm/s. An automatic cutting tool descends at preset intervals to cut the glass to size. Since the assembly belt must keep moving at constant speed, the cutter is set to cut at an angle to compensate for the motion of the glass. If the glass is 72.0 cm wide and the cutter moves across the width at a speed of 24.0 cm/s, at what angle should the cutter be set

The frequency of vibrations of a vibrating violin string is given by f = 1 2l t ρ where l is the length of the string, t is its tension, and ρ is its linear density.† (a) find the rate of change of the frequency with respect to the following. (i) the length (when t and ρ are constant) (ii) the tension (when l and ρ are constant) (iii) the linear density (when l and t are constant) (b) the pitch of a note (how high or low the note sounds) is determined by the frequency f. (the higher the frequency, the higher the pitch.) use the signs of the derivatives in part (a) to determine what happens to the pitch of a note for the following. (i) when the effective length of a string is decreased by placing a finger on the string so a shorter portion of the string vibrates df dl 0 and l is ⇒ f is ⇒ (ii) when the tension is increased by turning a tuning peg df dt 0 and t is ⇒ f is ⇒ (iii) when the linear density is increased by switching to another string df dρ 0 and ρ is ⇒ f is ⇒

A40.0 l tank of ammonia has a pressure of 12.7 kpa. calculate the. volume of the ammonia if it’s pressure is changed to 8.4 kpa while its temperature remains constant.

Need asap ‼️ 20 pts which gravitational force field diagram is drawn correctly? (answers in pictures below)