Physics
Physics, 05.05.2020 16:22, agilitygirl1

A large, open at the top, upright cylindrical tank contains fresh water with a density of 1.00 ✕ 103 kg/m3. If the air pressure is 101.3 kPa, determine the absolute pressure (in Pa) in the fluid at a depth of 29.0 m. Pa (b) Determine the force (in N) exerted by only the fluid on the window of an instrument probe at this depth if the window is circular and has a diameter of 3.90 cm. N

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:00, markyyy53
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
image
Physics, 22.06.2019 02:30, mhurtado143
Agas contained within a piston-cylinder assembly undergoes three processes in series: process 12: compression with pv= constant from 1 bar and 1 liter to 4 bar. process 23: constant pressure expansion to 1 liter. process 31: constant volume calculate the pressure and volume at each state, and sketch the processes on a p-vdiagram labeled with pressure and volume values at each numbered stat
Answers: 2
image
Physics, 22.06.2019 03:00, liquidmana42
The passage that directs air to the lungs is called a. diaphragm. b. larynx. c. bronchi. d. pharynx.
Answers: 2
image
Physics, 22.06.2019 10:30, johnthienann58
The precision of a laboratory instrument is ± 0.05 g. the accepted value for your measurement is 7.92 g. which measurements are in the accepted range? check all that apply. 7.85 g 7.89 g 7.91 g 7.97 g 7.99 g
Answers: 1
Do you know the correct answer?
A large, open at the top, upright cylindrical tank contains fresh water with a density of 1.00 ✕ 103...

Questions in other subjects:

Konu
English, 21.01.2020 01:31