Hooke’s law describes the linear relationship between stress and strain through Young’s modulus. Given two materials under the same elastic stress, the material with the higher modulus will stretch the material with a lower modulus.

The material with higher modulus will stretch less than

The material with lower modulus

Explanation:

A material with a higher modulus is stiffer and has better resistance to deformation. The modulus is defined as the force per unit area required to produce a deformation or in other words the ratio of stress to strain.

E= stress/stain

Hooks law states that provided the elastic limit is not exceeded the extension e of a spring is directly proportional to the load or force attached

F=ke

Where k is the constant which gives the measure of the spring under tension

it about 600 mph from what i calculated

need to see circuit to get time constant