A student in an electronics lab is studying the electrical properties of pieces of graphite. The student applies a potential difference of 24 V across the length of a cylindrical piece of graphite with a radius of 0.5 mm. The student has another piece of graphite of the same length but with a radius of 0.7 mm. The student wants the same current in both pieces of graphite. What potential difference should the student apply across the 0.7 mm piece? 6 V

  distance on the y-axis and time on the x-axis.

explanation:

the instantaneous velocity = change in position/time taken

the slope of the graph should give instantaneous velocity.

  slope of a graph = change in value of y -axis / change in values of x -axis

  comparing both the equations

    change in value of y -axis = change in position

  change in values of x -axis = time taken

so position values should be on the y axis and time values should be on the x axis.

distance on the y-axis and time on the x-axis.

as we probably am aware that our atmosphere or air have various levels, each level has different gasses, and each gas has another porousness. at the point when the light originates from lower porousness to higher penetrability, it alters its course. with the goal that implies that when the light originates from the moon to the earth, it alters it's course a lot more occasions. it essentially implies that the state of the light piece of the moon is changed on the earth.

not copied too! hope this !

joke:

h o h o hope you have a merry christmas!

when jerome paddle in flowing river towards east the net speed of jerome will increase

so the net speed of jerome will be given as

now the speed of paul will be same as it is given as he is running on the ground

so

so here we can say since the speed of jerome is more so he will win the race

now as we know the distance so the time difference is given as

so jerome will reach first and the time difference will be 203.55 s or 3.4 min

0.93xc=0.93x3x10^8m/s

2.54cm is 1 inch

360seconds i 1 hr