Physics
Physics, 21.04.2020 23:47, LouieHBK

An object with a mass of 8.9kg has a force of 92.0 Newtons applied to it. What is the resulting acceleration
of the object?
Enter Answer Here

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 19:30, davidsteck99
A33.1 g copper object is launched from a 1.5 m 30° steel incline positioned on the floor by being pulled up a string attached to a 50.0 g mass suspended vertically over a pulley. the object is projected towards a glass table where it lands when it is at the point along its trajectory with the lowest speed. it comes to a halt when it clears the opposite edge of the table. it then falls and lands on 9 physics texts each 5 cm thick that are stacked on the floor on the opposite side of the table. assume that the table does not have a ledge and the rectangular object experiences 0.05 n of air resistance as it falls towards the books. how far and how long did the object travel and how fast does it hit the books. assume that at the moment the copper object leaves the incline, the massless string and ideal pulley break off
Answers: 2
image
Physics, 22.06.2019 08:00, Lovelybunny321
What is a carrier wave and how does it affect what you hear on the radio
Answers: 1
image
Physics, 22.06.2019 18:30, raywalker3410
Adisk with a radius of r is oriented with its normal unit vector at an angle q with respect to a uniform electric field. which of the following would result in an increase in the electric flux through the disk? check all that apply? a. increasing the area of the disk b. decreasing the given orientation angle of the disk c. decreasing the strength of the electric field d. increasing the given orientation angle of the disk, but not exceeding an angle of 90
Answers: 1
image
Physics, 22.06.2019 20:50, dondre54
Asquare 1m x 1m plate is shown below. all four of its edges are kept at 0 co. at t=0the temperature distribution is given by: y xtsins n75)=.a) using separation of variables determine the temperature distribution t(x, y,t)along the plate at any time t. b) discretize the heat conduction equation +=22222 txtusing a second-order centered difference scheme for the two second derivatives and a first-order forward euler scheme for the first derivative. using von neumann stability analysis, determine the stability criterion for the proposed discretization scheme in terms of , hand t. solve for the maximum allowable time step tmax
Answers: 1
Do you know the correct answer?
An object with a mass of 8.9kg has a force of 92.0 Newtons applied to it. What is the resulting acce...

Questions in other subjects: