A long plastic rod of 20-mm diameter (k = 0.3 W/m · K and rhocp = 1040 kJ/m3 · K) is uniformly heated in an oven as preparation for a pressing operation. For best results, the temperature in the rod should not be less than 200°C. To what uniform temperature should the rod be heated in the oven if, for the worst case, the rod sits on a conveyor for 3 min while exposed to convection cooling with ambient air at 25°C and with a convection coefficient of 10 W/m2 · K? A further condition for good results is a maximum–minimum temperature difference of less than 10°C. Is this condition satisfied? If not, what could you do to satisfy it?