Suppose you are standing on the center of a merry-go-round that is at rest. You are holding a spinning bicycle wheel over your head so that its rotation axis is pointing upward. The wheel is rotating counterclockwise when observed from above.

For this problem, neglect any air resistance or frictionbetween the merry-go-round and its foundation. Suppose you now grab the edge of thewheel with your hand, stopping it from spinning. What happens to themerry-go-round?
A. It remainsat rest. B. It begins torotate counterclockwise (as observed from above).C. It begins torotate clockwise (as observed from above).

A50.0-n box is sliding on a rough horizontal floor, and the only horizontal force acting on it is friction. you observe that at one instant the box is sliding to the right at and that it stops in 2.25 s with uniform acceleration. what magnitude force does friction exert on this box

Write maxwell's equations and discuss the terms involved and the results of each equation in classical electrodynamics. if it is possible to write these equations in integral form, give the integral forms. find the wave equation for electromagnetic waves from the maxwell equations. what is the propagation velocity of electromagnetic waves in space according to the wave equation you find?

1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?