Technician A says that the accumulator is on the high-pressure side of the refrigerant system. Technician B says that the receiver-drier is attached to the evaporator outlet on the refrigerant system. Who is correct?

Question:

The options are

a. Technician A only

b. Technician B only

c. Both A and B

d. Neither A nor B

The correct option is

d. Neither A nor B

Explanation:

Here, we note that to locate the receiver/driers we look at the high-pressure side of refrigerant system normally around the tubes in between the expansion valve outlet and the condenser outlet and connected to the condenser.

While the accumulator can be found, attached to the evaporator outlet within the low pressure side of the refrigerant system.

Therefore, neither Technician A nor B is correct.

hi there!

your question asks at which segment does freezing occur.

since we're talking about water, the freezing point of water will be 32 degrees fahrenheit or below.

hope this ! ~

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia