A sled starts atop a hill at rest with 3,000 J of potential energy relative to the bottom of the hill. When the sled reaches the bottom of the hill it has 2,000 J of kinetic energy. Why does the sled have less energy at the bottom of the hill than at the top?

A) The hill isn't very steep.
B) Some of the energy is destroyed.
C) Some of the energy is converted to heat.
D) The sled does 1,000 J of work on the hill.

Utah's great salt lake has an average salinity seven times higher than that of the oceans. very few multicellular organisms live in this harsh environment. an example is the brine shrimp, which must devote a large portion of its metabolic energy to osmoregulation. these brine shrimp must available hint(s)utah's great salt lake has an average salinity seven times higher than that of the oceans. very few multicellular organisms live in this harsh environment. an example is the brine shrimp, which must devote a large portion of its metabolic energy to osmoregulation. these brine shrimp must pump water back into their cells to counter its loss due to osmosisactively pump water back out of their cells to counter its inflow due to osmosissynthesize membranes that are impermeable to substances that upset osmotic balanceactively pump salt back out of their cells to counter its inflow due to osmosis

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.

The horizontal blue line through the middle of the lens is called the optical axis. as the lamp is moved above or below the axis, keeping the horizontal distance to the center of the lens constant, how does the horizontal distance from the lens to the image change?