Physics
Physics, 14.04.2020 22:04, Learsyguerra26

The horizontal surface on which the 2.0 - kg block slides is frictionless. The speed of the block before it touches the spring is 9.0 m/s. How fast is the block moving at the instant the spring has been compressed 174.5 mm

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 05:00, mariamalakozay603
Aperson standing in a canoe exerts a force of 700 n to throw an anchor over the side. find the acceleration of the canoe if the total mass of the canoe and the person is 100 kg?
Answers: 1
image
Physics, 22.06.2019 09:40, dakshshberry
Asatellite component is in the shape of a cube with 10cm edges, has an evenly distributed mass of 2 kg and one bolt hole at each of four corners. if the maximum predicted random vibration environment is 10 grms, what bolt size would be a good choice for restraint? what other factors might drive bolt size besides force/stress?
Answers: 2
image
Physics, 22.06.2019 09:40, wi8wuwj283jendjdudjd
When you jump from an elevated position you usually bend your knees upon reaching the ground. by doing this, you make the time of the impact about 10 times as great as for a stiff-legged landing. in this way the average force your body experiences is a) less than 1/10 as great. b) more than 1/10 as great. c) about 1/10 as great. d) about 10 times as great.
Answers: 1
image
Physics, 22.06.2019 10:50, afonseca73
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
Do you know the correct answer?
The horizontal surface on which the 2.0 - kg block slides is frictionless. The speed of the block be...

Questions in other subjects: