Estimate the roll force and total power for annealed low-carbon steel strip 200 mm wide and 10 mm thick, rolled to a thickness of 6 mm. the roll radius is 200 mm, and the roll rotates at 200 rpm. let μ = 0.1. compare this high frictional force and power with the low frictional forces and power. the values of k and n are 530 mpa and 0.26, respectively.

Ajet plane has a sound level of 120 db at a distance of 60 m. what is the q23. sound level at a distance of 6.0 km? (60)2 (6000)? om solution 80db db, hint: 16x assume ultrasound waves travel through the body of an animal at 1540 q24. m/s. if a 30,000 hz signal were reflected off a portion of a heart which was moving toward the source at 3 m/s, what frequency signal would return to the stationary source? solution 30.117hz

Question 7 [2 marks] in the circuit below, the electromotive force generated by the battery is e = 6.0 v, and the resistances are r1 = r4 = 1.0 q, r2 = r3 =2.0 q. r. the power delivered by the battery to the circuit is closest to a. 6 w в. 12 w с. 15 w d. 18 w e. 20 w final exam autumn 2014 page 5 of 9 68037 physical modelling faculty of science [2 mark] question 8 with reference to question 7, the current through resistor r2 is closest to a. 1 a в. 2 а c. 3 a d. 4 a e. 6 a

Idon’t quite understand this problem