Consider an acrylic sheet of thickness L = 5 mm that is used to coat a hot, isothermal metal substrate at Th = 300°C. The properties of the acrylic are rho = 1990 kg/m3, c = 1470 J/kg · K, and k = 0.21 W/m · K. Neglecting the thermal contact resistance between the acrylic and the metal substrate, determine how long it will take for the insulated back side of the acrylic to reach its softening temperature, Tsoft = 90°C. The initial acrylic temperature is Ti = 20°C.
Answers: 1
Other questions on the subject: Physics
Physics, 22.06.2019 04:30, elizabethseoane1829
You are traveling in a car going at a constant speed of 100km/h down a long, straight highway. you pass another car going in the same direction which is traveling at a constant speed of 80km/h. as measured from your car's reference frame this other car is traveling at −20km/h. what is the acceleration of your car as measured from the other car's reference frame? what is the acceleration of the other car as measured from your car's reference frame?
Answers: 2
Physics, 22.06.2019 10:00, blackjack73
The rocket is fired vertically and tracked by the radar station shown. when θ reaches 66°, other corresponding measurements give the values r = 32700 ft, r¨ = 85 ft/sec2, and θ˙ = 0.019 rad/sec. calculate the magnitudes of the velocity and acceleration of the rocket at this position.
Answers: 3
Physics, 22.06.2019 15:30, tiffuuu
At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.
Answers: 1
Do you know the correct answer?
Consider an acrylic sheet of thickness L = 5 mm that is used to coat a hot, isothermal metal substra...
Questions in other subjects:
History, 25.12.2019 09:31
Social Studies, 25.12.2019 09:31
Arts, 25.12.2019 09:31
