Physics, 27.03.2020 19:54, winterblanco

Consider the car driving around a circular track. Once started, the driver maintains a speed of 45 m/h. Compare the driver's velocity with his acceleration in this case.
A) The car is accelerating because it is changing direction but the velocity is
constant.
B) The car is traveling at a constant rate of speed so it is not accelerating and
the velocity does not change.
C) Acceleration is the change in velocity so the car is experiencing a change
in velocity and it is accelerating.
D) The car is traveling at a constant rate of speed so it is not accelerating but
the velocity changes because the direction the car travels is constantly
changing

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 04:00, ashiteru123

What are the three ways that an object can accelerate

Answers: 2

continue

Physics, 22.06.2019 12:30, tigistamare03

When a vertical beam of light passes through a transparent medium, the rate at which its intensity i decreases is proportional to i(t), where t represents the thickness of the medium (in feet). in clear seawater, the intensity 3 feet below the surface is 25% of the initial intensity i0 of the incident beam. what is the intensity of the beam "10" feet below the surface? (give your answer in terms of i0. round any constants or coefficients to five decimal places.)

Answers: 2

continue

Physics, 22.06.2019 15:30, tiffuuu

At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.

Answers: 1

continue

Physics, 22.06.2019 15:50, micahsocool23

The space between two 15-in.-long concentric cylinders is filled with glycerin (viscosity = 8.5 × 10-3 lb·s/ft2). the inner cylinder has a radius of 1 in. and the gap width between cylinders is 0.1 in. determine (a) the torque and (b) the power required to rotate the inner cylinder at 180 rev/min. the outer cylinder is fixed. assume the velocity distribution in the gap to be linear.

Answers: 2

continue

Do you know the correct answer?

Consider the car driving around a circular track. Once started, the driver maintains a speed of 45 m...