For a bolted assembly with 10 bolts, the stiffness of each bolt is kb=4 Mlbf/in and the stiffness of the members is km=12 Mlbf/in per bolt. The joint is subjected to occasional disassembly for maintenance and should be preloaded accordingly. A fluctuation external load is applied to the entire joint with Pmax=80 kips and Pmin=20 kips. Assume the load is equally distributed to all the bolts. It has been determined to use ½ in-13 UNC grade 8 bolts. Determine the fatigue factor of safety using the Goodman criteria.

Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?

Which statement best describes the superposition principle? a.) if two in-phase waves arrive simultaneously at a point, their amplitudes add up b.) if two out-of-phase waves arrive simultaneously at a point, their amplitudes add up c.) if two in-phase waves arrive at a point one after another, their amplitudes add up d.) if two out-of-phase waves arrive at a point one after another, their amplitudes adds up

An alarm clock has a current of 4.5 amps and a resistance of 3.2 ohms. what is the voltage in the circuit? a.1.4 volts b.0.71 volts c.14 volts d.46 volts