A new interstate highway is being built with a design speed of 120 km/h. For one of the horizontal curves, the radius (measured to the innermost vehicle path) is tentatively planned as 300 m. The limiting value for coefficient of side friction at 120 km/h is 0.09. What rate of superelevation is required for this curve at the 120 km/h design speed

28.79%

Explanation:

Given

Design Speed, V = 120km/h = 33.33m/s

Radius, R = 300m

Side Friction, Fs = 0.09

Gravitational Constant = 9.8m/s²

Using the following formula, we'll solve the required rate of superelevation.

e + Fs = V²/gR where e = rate

e = V²/gR - Fs

e = (33.33)²/(9.8 * 300) - 0.09

e = 0.287853367346938

e = 28.79%

Hence, the required rate of superelevation for the curve is calculated as 28.79%

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia

energy stored in the capacitor= 9.72 x 10⁻⁴ j

explanation:

the energy stored in the capacitor is given by

e= 1/2 c v²

e= energy stored

c= capacitance= 1.5 µc= 1.5 x 10⁻⁶f

v= potential difference=36 v

so energy stored= e= 1/2 (1.5 x 10⁻⁶) (36)²

energy stored= 9.72 x 10⁻⁴j