Physics, 13.03.2020 03:12, wow65

A typical laboratory centrifuge rotates at 4000 rpm. Test tubes have to be placed into a centrifuge very carefully because of the very large accelerations. What is the acceleration at the end of a test tube that is 10 cm from the axis of rotation

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 20:30, NetherisIsTheQueen

F500 j of energy were added to 1 kg of each of these samples, which would experience the least temperature increase?

Answers: 2

continue

Physics, 22.06.2019 05:40, thomasalmo2014

Unpolarized light of intensity i_0=750w/m^2 is incident upon two polarizers. after passing through both polarizers the intensity is i_2=280w/m^2. (a) what is the intensity of the light after it passes through the first polarizer in w/m^2? (b) write an equation for the angle between the polarizers in terms of the initial (i_0) and final (i_2) intensities. (c) find the angle between the polarizers in degrees.

Answers: 3

continue

Physics, 23.06.2019 04:00, njones58emailtjcedu

A15 ohm resistor and a 25 ohm resistor are connected in parallel to a 60 volt battery. what is the power used by each device

Answers: 1

continue

Physics, 23.06.2019 07:40, abelsoto

Consider lifting a box of mass m to a height h using two different methods: lifting the box directly or lifting the box using a pulley (as in the previous part). what is wd/wp, the ratio of the work done lifting the box directly to the work done lifting the box with a pulley?

Answers: 2

continue

Do you know the correct answer?

A typical laboratory centrifuge rotates at 4000 rpm. Test tubes have to be placed into a centrifuge...