Cylindrical specimen of a metal alloy 46.0 mm long and 9.72 mm in diameter is stressed in tension. A true stress of 386 MPa causes the specimen to plastically elongate to a length of 52.9 mm. If it is known that the strain-hardening exponent for this alloy is 0.2, calculate the true stress (in MPa) necessary to plastically elongate a specimen of this same material from a length of 46.0 mm to a length of 55.6 mm.

You carry a 7.0-kg bag of groceries 1.2 m above the ground at constant speed across a 2.7m room. how much work do you do on the bag in the process? (a) 157j (b) 0.00j (c) 185j (d) 82j

Air enters a gas turbine with two stages of compression and two stages of expansion at 100 kpa and 17°c. this system uses a regenerator as well as reheating and intercooling – the intercooler returns the air to the inlet temperature. the pressure ratio across each compressor is 4 ; 300 kj/kg of heat are added to the air in each combustion chamber; and the regenerator operates perfectly while increasing the temperature of the cold air by 20°c. determine the system’s thermal efficiency. assume isentropic operations for all compressor and the turbine stages and use constant specific heats at room temperature. (0.378)

Consider two less-than-desirable options. in the first you are driving 30 mph and crash head-on into an identical car also going 30 mph. in the second option you are driving 30 mph and crash head-on into a stationary brick wall. in neither case does your car bounce off the thing it hits, and the collision time is the same in both cases. which of these two situations would result in the greatest impact force?