The truss system below is supported by a pin at A and a roller at C. When unloaded, truss member AC has length L = 2022 mm. The truss members are made of steel pipes with cross-sectional area Ac = 3265 mm? and elasticity modulus E = 216 GPa. A vertical and a horizontal load of magnitude P= 521 kN are applied at joint B. The angle is 0 =44º

Eddy whose mass is 55kg climbs up the 1.50 meter high stairs in 2s. calculate eddy’s power rating

The two required components for a generator are

The ultracentrifuge is an important tool for separating and analyzing proteins. because of the enormous centripetal accelerations, the centrifuge must be carefully balanced, with each sample matched by a sample of identical mass on the opposite side. any difference in the masses of opposing samples creates a net force on the shaft of the rotor, potentially leading to a catastrophic failure of the apparatus. suppose a scientist makes a slight error in sample preparation and one sample has a mass 10 mg larger than the opposing sample. if the samples are 12 cm from the axis of the rotor and the ultracentrifuge spins at 70,000 rpm, what is the magnitude of the net force on the rotor due to the unbalanced samples? ( be thorough on your answer)