Physics
Physics, 10.03.2020 00:36, jjgurl60

On a very muddy football field, a 110-kg linebacker tackles an 85-kg halfback. Immediately before the collision, the linebacker is slipping with a velocity of 8.8 m/s north and the half-back is sliding with a velocity of 7.2 m/s east. What is the velocity (magnitude and direction) at which the two players move together immediately after the collision?

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 17:20, londonval
Your 249 ml cup of coffee is too hot to drink when served at 82 degree celsius. what is the mass of an ice cube taken from a -21 degree celsius freezer, that will cool your coffee to a pleasant 54 degree celsius. specific heat of the water is 4190 j/kg c, specific heat of ice is 2090 j/kg c, heat of fusion of ice is 3.33 x 10^5 j/kg
Answers: 3
image
Physics, 21.06.2019 21:00, Amandarobersonn
An electric current in a wire will push or pull on a permanent magnet. which statement best explains how an electric current creates an electromagnetic force on another magnet?
Answers: 2
image
Physics, 21.06.2019 22:00, markyyy53
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
image
Physics, 22.06.2019 13:40, andrespiperderc
Use the profile illustrated for problem (1). assume that the layer of silty sand fill (sm) is placed over the entire site. estimate the thickness of the fill (h - in feet) that will cause the effective vertical stress at the center of the clay layer to increase by 517.5 pounds per square foot.
Answers: 1
Do you know the correct answer?
On a very muddy football field, a 110-kg linebacker tackles an 85-kg halfback. Immediately before th...

Questions in other subjects:

Konu
English, 26.06.2019 08:30