Physics
Physics, 07.03.2020 04:47, oof5221

A vertical cylindrical tank 10 ft in diameter, has an inflow line of 0.3 ft inside diameter and an outflow line of 0.4 ft inside diameter. Water is flowing in the inflow line at a velocity of 5 ft/s and in the outflow line at a velocity of 2 ft/s. Is the level in the tank rising or decreasing? With what speed (ft/sec)?

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 02:30, ntangpricha
Eddy whose mass is 55kg climbs up the 1.50 meter high stairs in 2s. calculate eddy’s power rating
Answers: 1
image
Physics, 22.06.2019 06:20, jonmorton159
Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?
Answers: 1
image
Physics, 22.06.2019 09:50, ggcampos
Which statement correctly describes the current in a circuit that is made up of any two resistors connected in parallel with a battery? a. the current in the battery and in each resistor is the same b. the current the battery equals to the sum of the currents in the resistors c. the current in the battery is less than the current in either resistor d. the current in the battery equals to the product of the currents in the resistors
Answers: 1
image
Physics, 22.06.2019 12:30, lmolder1329
Consider a 1000 w iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-t6 (ρ = 2770 kg/m3 and cp = 875 j/kg°c). the base plate has a surface area of 0.03 m2. initially, the iron is in thermal equilibrium with the ambient air at 22°c. assuming 90% of the heat generated in the resistance wires is transferred to the plate, determine the minimum time needed for the plate temperature to reach 200°c.
Answers: 1
Do you know the correct answer?
A vertical cylindrical tank 10 ft in diameter, has an inflow line of 0.3 ft inside diameter and an o...

Questions in other subjects: