Physics, 04.03.2020 05:49, AutumnJoy12

The block has a weight of 75 lblb and rests on the floor for which μkμk = 0.4. The motor draws in the cable at a constant rate of 6 ft/sft/s. Neglect the mass of the cable and pulleys.

Answers: 2

Show answers

Answers

answered: ReonRamseyz

The given question is incomplete. The complete question is as follows.

The block has a weight of 75 lb and rests on the floor for which $\mu k$ = 0.4. The motor draws in the cable at a constant rate of 6 ft/sft/s. Neglect the mass of the cable and pulleys.

Determine the output of the motor at the instant $\theta = 30^{o}$ .

Explanation:

We will consider that equilibrium condition in vertical direction is as follows.

$\sum F_{y} = 0$

N - W = 0

N = W

or, N = 75 lb

Again, equilibrium condition in the vertical direction is as follows.

$\sum F_{x} = 0$

$T_{2} - F_{k}$ = 0

$T_{2} = \mu_{k} N$

= $0.4 \times 75 lb$

= 30 lb

Now, the equilibrium equation in the horizontal direction is as follows.

$\sum F_{x} = 0$

$T Cos (30^{o}) + T Cos (30^{o}) = T_{2}$

$2T Cos (30^{o}) = T_{2}$

or, T = $\frac{T_{2}}{2 Cos (30^{o})}$

= $\frac{30}{2 Cos (30^{o})}$

= $\frac{30}{1.732}$

= 17.32 lb

Now, we will calculate the output power of the motor as follows.

P = Tv

= $17.32 lb \times 6$

= $103.92 \times \frac{1}{550} \times \frac{hp}{ft/s}$

= 0.189 hp

or, = 0.2 hp

Thus, we can conclude that output of the given motor is 0.2 hp.

answered: davisparker5269

The out put power is 0.188 hp.

Explanation:

Given that,

Weight = 75 lb

Coefficient of friction = 0.4

Rate = 6 ft/s

Suppose, Determine the output of the motor at the instant θ = 30°.

For block,

We need to calculate the force in vertical direction

Using balance equilibrium equation in vertical

$\sum{F_{y}}=0$

N-W=0

N=W

Put the value into the formula

$N=75\ lb$

Using balance equilibrium equation in horizontal

$\sum{F_{x}}=0$

$T_{2}-f_{k}=0$

$T_{2}=\mu_{k}N$

Put the value into the formula

$T_{2}=0.4\times75$

$T_{2}=30\ lb$

For pulley,

We need to calculate the force

Using balance equilibrium equation in horizontal

$\sum{F_{x}}=0$

$T\cos\theta+T\cos\theta=T_{2}$

$2T\cos30=T_{2}$

$T=\dfrac{T_{2}}{2\cos30}$

Put the value into the formula

$T=\dfrac{30}{2\times\cos30}$

$T=17.32\ lb$

We need to calculate the out put power

Using formula of power

P=Tv

Put the value into the formula

$P=17.32\times6$

$P=103.92\ lb.ft/s$

$P=0.188\ hp$

Hence, The out put power is 0.188 hp.

The block has a weight of 75 lblb and rests on the floor for which μkμk = 0.4. The motor draws in th

answered: Guest

Gravity bc it’s gravity

answered: Guest

frequency or wavelenth of em radiation in a vacuum

Other questions on the subject: Physics

Physics, 21.06.2019 13:40, hannahgracew12

The de broglie relation λ=h/p can be rewritten in terms of the wave number k as p=kℏ. recall that wave number is defined by k=2π/λ. using the fact that λ=v/f, find the wave numbers k1 and k2 corresponding to frequencies f1 and f2. express your answer as two expressions

Answers: 2

continue

Physics, 22.06.2019 04:50, bella2331

Asher cycles 12 miles in 16 hours. what is his speed?

Answers: 1

continue

Physics, 22.06.2019 05:40, kkbrookly7496

Two polarizers are oriented at 40∘ to each other and plane-polarized light is incident on them. if only 16 percent of the light gets through both of them, what was the initial polarization direction of the incident light?

Answers: 2

continue

Physics, 22.06.2019 07:30, anonymous1813

Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.

Answers: 3

continue

Do you know the correct answer?

The block has a weight of 75 lblb and rests on the floor for which μkμk = 0.4. The motor draws in th...