is a structural engineered wood that utilizes wood from species of wood that are not large or strong enough to be useful in solid lumber products, uses 12 in. long strands that are cut from logs, dried, and immersed in resin before being pressed into solid billets, and strands are aligned parallel to each other to take advantage of the natural strength of the wood.

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Astudent pushes on a 20.0 kg box with a force of 50 n at an angle of 30° below the horizontal. the box accelerates at a rate of 0.5 m/s2 across a horizontal floor. what is the value of the normal force on the box? 200 n 243 n 156 n 225 n

2. -/1 pointsserpse10 2.7.p.017.mi. an object moving with uniform acceleration has a velocity of 14.0 cm/s in the positive x direction when its x coordinate is 2.97 cm. if its x coordinate 2.85 s later is -5.00 cm, what is its acceleration? cm/s2 need ? read it master it