Car leaves a stop sign and exhibits a constant acceleration of 0.300 m/s2 parallel to the roadway. The car passes over a rise in the roadway such that the top of the rise is shaped like an arc of a circle of radius 500 m. Now the car is at the top of the rise, its velocity vector is horizontal and has a magnitude of 6.00 m/s. What are the magnitude and direction of the total acceleration vector for the car at this instant

0.308 m/s2 at an angle of 13.5° below the horizontal

Explanation:

The parallel acceleration to the roadway is the tangential acceleration on the rise.

The normal acceleration is the centripetal acceleration due to the arc. This is given by

The tangential acceleration, from the question, is

The magnitude of the total acceleration is the resultant of the two accelerations. Because these are perpendicular to each other, the resultant is given by

The angle the resultant makes with the horizontal is given by

Note that this angle is measured from the horizontal downwards because the centripetal acceleration is directed towards the centre of the arc

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water

  the unit of the measure =

explanation:

  the property that is quantified by the energy needed per of material to raise the temperature by one.

  si unit of energy = joule (j)

  si unit of temperature = kelvin (k)

  si unit of mass of material = kilogram (kg)

the property that is quantified by the energy needed per of material to raise the temperature by one is called specific heat.

the unit of specific heat is