Physics, 25.02.2020 01:55, WallaceHarrison123
2- A DC/DC converter is needed to be designed for an electric vehicle. The DC/DC converter should convert the voltage from the battery pack at 48 V to supply the 12 V loads (Radio, horn, accessories, etc..). The load needs an output current of 5 A. (Hint: the load can be represented as a resistance). a) Draw a schematic of the DC/DC converter that you suggest for this application. b) Specify the duty ratio of the converter. c) Suggest a switching frequency of the converter. d) Design the switching inductor such that the current is continuous and the inductor current ripple is less than 30% of the average inductor current. e) Design the output capacitor such that the output voltage ripple is less than 5%. f) What are the peak voltage and current values of your switches (Mosfet and Diode)
Answers: 3
Other questions on the subject: Physics
Physics, 22.06.2019 05:00, emj617
In a stagnant pool of water, a crayfish may spend much of its time lying with one side of its carapace near the surface of the water. in this position, it will move the walking legs on that side in a rhythmic back-and-forth motion. explain the likely function of this behavior.
Answers: 1
Physics, 22.06.2019 10:10, natalieagustinlop54
Henry, whose mass is 95 kg, stands on a bathroom scale in an elevator. the scale reads 830 n for the first 2.4 s after the elevator starts moving, then 930 n for the next 2.4 s. part a what is the elevator's speed 4.8 s after starting? express your answer with the appropriate units.
Answers: 2
Physics, 22.06.2019 23:40, ella3714
Consider a u-tube whose arms are open to the atmosphere. now equal volumes of water and light oil (ρ = 49.3 lbm/ft3) are poured from different arms. a person blows from the oil side of the u-tube until the contact surface of the two fluids moves to the bottom of the u-tube, and therefore, the liquid levels in the two arms are the same. if the fluid height in each arm is 30 in, determine the gage pressure exerted by the person on the oil by blowing.
Answers: 3
Do you know the correct answer?
2- A DC/DC converter is needed to be designed for an electric vehicle. The DC/DC converter should co...
Questions in other subjects:
