You hang a heavy ball with a mass of 30 kg from a tungsten rod 2.8 m long by 1.5 mm by 2.6 mm. You measure the stretch of the rod, and find that the rod stretched 0.000594 m. Using these experimental data, what value of Young's modulus do you get? Y = N/m2 The atomic mass of tungsten is 184 g/mole, and the density of tungsten is 18.7 g/cm3. Using this information along with the measured value of Young's modulus, calculate the speed of sound in tungsten.

Young's modulus (Y) = 3.56×10^11 N/m^2

The speed of sound in tungsten = 6166.4 m/s

Explanation:

Young's modulus (Y) = stress/strain

Stress = force/area

Force = mg = 30×9.8 = 294 N

Area = 1.5 × 2.6 = 3.9 mm^2 = 3.9/10^6 = 3.9×10^-6 m^2

Stress = 294/3.9×10^-6 = 7.54×10^7 N/m^2

Strain = extension/length

Extension = 0.000594 m

Length = 2.8 m

Strain = 0.000594/2.8 = 2.12×10^-4

Y = 7.54×10^7/2.12×10^-4 = 3.56×10^11 N/m^2

Y = h × rho × g

rho = 18.7 g/cm^3 = 18.7 g/cm^3 × 1 kg/1000 g × (100 cm/1 m)^3 = 18,700 kg/m^3

h = 3.56×10^11/(18,700×9.8) = 1.94×10^6 m

From the equations of motion

v^2 = u^2 + 2gh =

Initial speed (u) = 0 m/s

v = sqrt (2×9.8×1.94×10^6)

v = 6166.4 m/s

Explanation:

Below is an attachment containing the solution.

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water

i think its c if i'm wrong