Physics, 18.02.2020 03:59, lizdeleon248

A three-phase generator supplies two three-phase loads. The 2.4 kV generator is rated at 180 kVA. The per-unit impedance of Load 1 is ZLoad1=80%+j75% and for Load 2 is ZLoad2=70%+j25% on 200 kVA and 2.5 kV bases.

(a) Determine the ohmic value of the impedances.

(b) Calculate the source current in amperes and in percent if the generator operating voltage is 3.8 kV (line-to-line) and a reactance of X=125% is connected in series with the generator voltage.

Please show step by step solution and make sure answers correspond to the answer key below:

(a) Zload1 = 25 + j23.4 Ω , Zload2 = 21.9 + j7.8 Ω ; (b) Igen = 45.3 A = 97.99%

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 12:10, saniyawilliams1207

Energy flows from the producer level to the level. is called

Answers: 1

continue

Physics, 22.06.2019 16:00, lazavionadams81

At what time will the interfering waves have an amplitudeof zero?

Answers: 1

continue

Physics, 22.06.2019 17:40, yoongnzl

Aspring is used to stop a 50-kg package which is moving down a 20º incline. the spring has a constant k = 30 kn/m and is held by cables so that it is initially compressed 50 mm. knowing that the velocity of the package is 2 m/s when it is 8 m from the spring and neglecting friction, determine the maximum additional deformation of the spring in bringing the package to rest.

Answers: 1

continue

Physics, 22.06.2019 23:00, aliyyahlove

Awelder using a tank of volume 7.50×10^-2 m^3 fills it with oxygen (with a molar mass of 32.0 g/mol ) at a gauge pressure of 3.30×10^5 pa and temperature of 37.1 ∘c. the tank has a small leak, and in time some of the oxygen leaks out. on a day when the temperature is 23.1 ∘c, the gauge pressure of the oxygen in the tank is 2.00×10^5 pa . a) find the initial mass of oxygen. b) find the mass of oxygen that has leaked out.

Answers: 3

continue

Do you know the correct answer?

A three-phase generator supplies two three-phase loads. The 2.4 kV generator is rated at 180 kVA. Th...