Physics, 18.02.2020 02:16, jsh65bsbs

A single-phase electrical load draws 600KVA at 0.6 power factor lagging. a) Find the real and reactive power absorbed by the load. b) Draw the power triangle. c) Determine the KVAR of a capacitor to be connected across the load to raise the power factor to 0.95.

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 02:30, JanaMiqdad1003

Agas initially at p1 = 1 bar and occupying a volume of 0.5 liter is compressed within a piston–cylinder assembly to a final pressure p2 = 4 bar. (a) if the relationship between pressure and volume during the compression is pv = constant, determine the volume, in liters, at a pressure of 3 bar. (b) repeat for a linear pressure–volume relationship between the same end states. reference

Answers: 1

continue

Physics, 22.06.2019 10:50, afonseca73

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.

Answers: 3

continue

Physics, 22.06.2019 18:30, dakotakeating4513

Apiece of metal 75g at 110°c is dropped in a container with 500g at 20°c. the h2o if temperature is 24°c find specific heat capacity of metal

Answers: 3

continue

Physics, 23.06.2019 02:30, hewonabi123

Aproton is shot from the negative disk toward the positive disk. what launch speed must the proton have to just barely reach the positive disk?

Answers: 2

continue

Do you know the correct answer?

A single-phase electrical load draws 600KVA at 0.6 power factor lagging. a) Find the real and reacti...