Two wires with equal lengths are made of pure copper. The diameter of wire A is three times the diameter of wire B. When 8 kg masses are hung on the wires, wire B stretches more than wire A. You make careful measurements and compute Young's modulus for both wires. What do you find?a. YA > YBb. YA = YBc. YA < YB

c. YA < YB

Explanation:

The formula for Young’s modulus is = Tensile stress / Tensile strain

Tensile stress= Force x Length

Force= mass x acceleration due to gravity

 = 8kg x 10m/s

 = 80kgm/s

Tensile stress  = 80kgm/s x 2m = 160kgm2/s

Tensile strain= Area x change in length

Area= pi x D2 / 4; Pi = 3.14

Change in length = L2 – L1 (New length – Initial length)

Given parameters:

Length of wire A = Length of wire B, (let’s use 2meters for the calculation)

For wire A, Diameter = 3 x Wire B diameter

Assuming Diameter of wire B = 1meter

Therefore, diameter of wire A = 1 x 3 = 3meters

It is said that wire B stretches more than wire A when the man of 8kg is placed on both

For wire B, let’s assume new length is = 4m

For wire A let’s assume new length is = 3m.

(i)Tensile strain of wire A =  

Area of wire A = 3.14 x (32)/4 = 7.065m2

Change in length = 3m - 2m = 1m.

Therefore, tensile strain = 7.065m2 x 1m = 7.065m3

Young’s modulus for wire A (YA) = 160kgm2/s divided by 7.065m3  

   = 22.64Pa.

(ii)Tensile strain of wire B =

Area of wire B = 3.14 x (12)/4 = 0.785m2

Change in length = 4m – 2m = 2m

Therefore, tensile strain = 0.785m2 x 2m = 1.57m3

Young’s modulus for wire B (YB) = 160kgm2/s divided by 1.57m3

   = 101.91Pa.

From the calculations above, we see that YA is less than YB (YA < YB). This is true given that wire A has a greater diameter than wire B which in turn impacts the Area of the wire since the diameter is directly proportional to area and the area is inversely proportional to the young’s modulus.

it will be pushed away from the source of the electric field. a negative charge in a cloud induces a positive charge in the ground below the cloud.

explanation:

the cellphone, they would then know if the killer would have contacted them or always hated them. or if it was a breakup. but if that is not the case, then it would be the clothing. to put in a bullet, it would have to be put in by hands. hands have finger prints which, would have giving you the answer of who done it.

explanation: