Physics
Physics, 17.01.2020 19:31, bhhzd7499

In the late 19th century, great interest was directed toward the study of electrical discharges in gases and the nature of so-called cathode rays. one remarkable series of experiments with cathode rays, conducted by j. j. thomson around 1897, led to the discovery of the electron.

with the idea that cathode rays were charged particles, thomson used a cathode-ray tube to measure the ratio of charge to mass, q/m, of these particles, repeating the measurements with different cathode materials and different residual gases in the tube.

part a

what is the most significant conclusion that thomson was able to draw from his measurements?

he found a different value of q/m for different cathode materials.

he found the same value of q/m for different cathode materials.

from measurements of q/m he was able to calculate the charge of an electron.

from measurements of q/m he was able to calculate the mass of an electron.

part b

what is the distance δy between the two points that you observe? assume that the plates have length d, and use e and m for the charge and the mass of the electrons, respectively.

express your answer in terms of e, m, d, v0, l, and e0.

part c

now imagine that you place your entire apparatus inside a region of magnetic field of magnitude b0 (figure 2) . the magnetic field is perpendicular to e⃗ 0 and directed straight into the plane of the figure. you adjust the value of b0 so that no deflection is observed on the screen.

what is the speed v0 of the electrons in this case?

express your answer in terms of e0 and b0.

part d

in your experiment, you measure a total deflection of 4.12 cm when an electric field of 1.10×103v/m is established between the plates (with no magnetic field present). when you add the magnetic field as described in part c, to what value do you have to adjust its magnitude b0 to observe no deflection?

assume that the plates are 6.00 cm long and that the distance between them and the screen is 12.0 cm.

express your answer numerically in tesla.

part e

now suppose you carry out a second thomson experiment with a different beam that contains two types of particles. in particular, both types have the same mass m as an electron, but one has charge e and the other has charge 2e. the beam is filtered, such that both types of particle have the same speed. as in the previous experiment, initially only the electric field is imposed and the deflection of the beam is observed as a spot on the screen; then, in the second phase of the experiment, one attempts to tune the magnetic field to exactly cancel the effect of the electric field.

what would you observe on the screen during this experiment?

two off-centered spots in both the first and the second phases of the experiment

two off-centered spots in the first phase of the experiment; one centered spot in the second phase of the experiment

two off-centered spots in the first phase of the experiment; one centered and one off-centered spot in the second phase of the experiment

one off-centered spot in the first phase of the experiment; one centered and one off-centered spot in the second phase of the experiment

one off-centered spot in the first phase of the experiment; two off-centered spots in the second phase of the experiment

one off-centered spot in both the first and the second phases of the experiment

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 21:00, aruhter9485
Apulley with a mechanical advantage of 5 will require you to pull times the amount of rope. a. 1/5 b. 5 c. 10 d. 15
Answers: 2
image
Physics, 22.06.2019 08:20, mimithurmond03
The bubba chump shrimp company processes and packages shrimp for sale to wholesale seafood distributors. the shrimp are transported to the main plant by trucks that carry 1,000 pounds (lb) of shrimp. once the continuous flow processing of the shrimp begins, no inventory is allowed in buffers due to spoilage and all of the shrimp must be processed within 12 hours to prevent spoilage. the processing begins at the sorter, where the trucks dump the shrimp onto a conveyor belt that feeds into the sorter, which can sort up to 500 lb per hour. the shrimp then proceed to the desheller, which can process shrimp at the rate of 400 lb per hour. however, after 3 hours and 45 minutes of processing, the desheller must be stopped for 15 minutes to clean out empty shrimp shells that have accumulated. the veins of the shrimp are then removed in the deveining area at a maximum rate of 360 lb per hour. the shrimp proceed to the washing area, where they are processed at 750 lb per hour. finally, the shrimp are packaged and frozen. what is the daily process capacity of the processing plant (excluding the packaging and freezing)?
Answers: 2
image
Physics, 22.06.2019 21:00, richard80
Give me a example of a decomposer. explain what would happen if decomposers were absent from a forest ecosystem
Answers: 1
image
Physics, 23.06.2019 02:30, roseemariehunter12
Ball bearings are made by letting spherical drops of molten metal fall inside a talll tower-called a shot tower- and solidify as they fall. a-if a bearing needs 4.0 s to solidify enough for impact, how high must the tower be? b- what is the bearing's impact velocity?
Answers: 3
Do you know the correct answer?
In the late 19th century, great interest was directed toward the study of electrical discharges in g...

Questions in other subjects:

Konu
Mathematics, 16.11.2020 22:50