Physics
Physics, 16.01.2020 23:31, karlyisaunicorn

What is the proportionality between pressure and temperature, and the proportionality between atmospheric pressure and tempratureis it a direct relationship or inverse relationship?

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:00, moneybaggzay123
1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?
Answers: 2
image
Physics, 22.06.2019 17:30, madisonnewby5021
Four point charges each having charge q are located at the corners of a square having sides of length a. find symbolic expressions for the following. (a) the total electric potential at the center of the square due to the four charges (use any variable or symbol stated above along with the following as necessary: ke.) vtotal= (b) the work required to bring a fifth charge p from infinity to the center of the square (use any variable or symbol stated above along with the following as necessary: w=
Answers: 2
image
Physics, 23.06.2019 03:30, allieeastridge
Select the correct lewis structure for fluorine which is group 7a element?
Answers: 1
image
Physics, 23.06.2019 10:30, Serenitybella
Car batteries are often rated in amp-hours. this rating indicates the quantity of charge that can pass through the battery before the battery's chemical energy must be restored by the car's generator or some other source. the amp-hour unit is convenient for simple calculations. for example, a 60-amp-hour battery can supply a current of 1.0 a for 60 h (or 60 a for 1.0 h) before going dead. find the energy stored in the following. (a) a 58 a-h, 10 v car battery(b) a 1.3 a-h, 1.7 v flashlight battery
Answers: 1
Do you know the correct answer?
What is the proportionality between pressure and temperature, and the proportionality between atmosp...

Questions in other subjects: