Physics, 15.01.2020 04:31, bella2284

What is the term for hardening or curing the sealant or composite material by exposing the material to a curing light?

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 16:00, lilrel8602

Six solutions are made, each with a y concentration of 1.0 μm and varying concentrations of ab as shown below. based on the concentrations, rank the solutions in decreasing order of reaction rate.

Answers: 2

continue

Physics, 22.06.2019 20:00, chantelljenkins2

Aturntable that spins at a constant 74.0 rpm takes 3.10 s to reach this angular speed after it is turned on. find its angular acceleration (in rad/s2), assuming it to be constant, and the number of degrees it turns through while speeding up.

Answers: 2

continue

Physics, 23.06.2019 03:00, jocelyn7575

Are good conductors of heat also good conductors of electricity? explain your answer.

Answers: 2

continue

Physics, 23.06.2019 06:30, IkarosSakurai

Asquare isothermal chip is of width w=5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the front surface is exposed to the flow of a coolant at tinf=15 °c. from reliability considerations, the chip temperature must not exceed t=85 °c. if the coolant is air and the corresponding convection coefficient is h=200 w/m2 x k, what is the maximum allowable "power" of the chip? if the coolant is a liquid for which h=3000 w/m2 x k, what is the maximum allowable power of the chip?

Answers: 2

continue

Do you know the correct answer?

What is the term for hardening or curing the sealant or composite material by exposing the material...