Physics, 13.01.2020 21:31, lestessanders02

In which of the following scenarios does object 1 do +10 joules of work on object 2?

a. object 1 exerts a 10 newton force on object 2 in the direction of its 1 meter displacement.
b. object 1 exerts a 1 newton force on object 2 in the direction of its 10 meter displacement.
c. object 1 exerts a 10 newton force at a 60 degree angle relative to its 2 meter displacement.
d. all of the above are true.
e. only two of the above are true.
f. none of the above are true.

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 01:10, Jasten

Aparticle initially moving east with a speed of 20.0 m/s, experiences an acceleration of 3.95 m/s, north for a time of 8.00 s. what was the speed of the particle after this acceleration, in units of m/s? give the answer as a positive number.

Answers: 1

continue

Physics, 22.06.2019 16:50, Jstylez1789

Consider the growth of a 20-nm-diameter silicon nanowire onto a silicon wafer. the temperature of the wafer surface is maintained at 2400 k. assume the thermal conductivity of the silicon nanowire is 20 wm-1k-1 and all its surfaces including the tip are subjected to convection heat transfer with the coefficient h = 1×105 wm-2k-1 and t∞ = 8000 k. when the nanowire grows to l = 300 nm, what is the temperature of the nanowire tip (t (x =

Answers: 1

continue

Physics, 22.06.2019 21:00, cici65360

What do the atoms of elements in the same group have in common? a. they have the same atomic numbers. b. they have the same average atomic masses. c. they have the same number of electron shells. d. they have the same number of electrons in their outermost shells.

Answers: 1

continue

Physics, 22.06.2019 21:20, CM0

Abeverage can is made of 3004-h19 aluminum alloy (elastic modulus 69 gpa, tensile yield strength 285 mpa, density 2.72 g/cm^3). the dimensions on the can are approximated as a thin-walled cylinder with a height of 4.83 inches, diameter of 2.60 inches. empty the can has a mass of 14.2 g. determine: a. the wall thickness of the cylinder b. assuming a pinned-pinned condition what is the critical load? c. assuming a fixed-fixed condition what is the critical load?

Answers: 1

continue

Do you know the correct answer?

In which of the following scenarios does object 1 do +10 joules of work on object 2?

a...