Physics, 02.01.2020 21:31, parisaidan366

Technician a says that low compression on a single cylinder will cause an engine not to start. technician b says that low compression on a single cylinder means that the engine can be fixed with a tune-up. who is correct?

tech a

tech b

both a and b

neither a nor b

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 03:40, srtero

Aprojectile is launched from ground level with an initial velocity of v 0 feet per second. neglecting air resistance, its height in feet t seconds after launch is given by s equals negative 16 t squared plus v 0 t. find the time(s) that the projectile will (a) reach a height of 192 ft and (b) return to the ground when v 0equals112 feet per second. (a) find the time(s) that the projectile will reach a height of 192 ft when v 0equals112 feet per second. select the correct choice below and, if necessary, fill in the answer box to complete your choice.

Answers: 1

continue

Physics, 22.06.2019 06:00, quetzaliescalona

A1,700kg car is being used to give a 1,400kg car a push start by exerting a force of 140n the impulse on the smaller car during the 30.0s of contact is +670kg*m/s. what is the impulse of the smaller car on the larger car? -814 kg*m/s 0kg *m/s -670kg*m/s -550kg*m/s

Answers: 1

continue

Physics, 22.06.2019 16:50, lizzepacheco

Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°c by rejecting waste heat to cooling water that enters the condenser at 18°c at a rate of 0.25 kg/s and leaves at 26°c. the refrigerant enters the condenser at 1.2 mpa and 50°c. if the compressor consumes 3.3 kw of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the cop, and (d) the minimum power input to the compressor for the same refrigeration load.

Answers: 2

continue

Physics, 22.06.2019 19:20, anaiyamills

Two kilograms of air within a piston–cylinder assembly executes a carnot power cycle with maximum and minimum temperatures of 800 k and 300 k, respectively. the heat transfer to the air during the isothermal expansion is 60 kj. at the end of the isothermal expansion the volume is 0.4 m3. assume the ideal gas model for the air. determine the thermal efficiency, the volume at the beginning of the isothermal expansion, in m3, and the work during the adiabatic expansion, in kj.

Answers: 1

continue

Do you know the correct answer?

Technician a says that low compression on a single cylinder will cause an engine not to start. techn...