Physics
Physics, 28.12.2019 05:31, CristianPaz

On a unicast transmission, a transmitter and receiver have latency settings of 0.25 msec and 1.00 msec, respectively. when will the audio playout of the receiving device?

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 08:00, kaylaamberd
Aheat engine running backward is called a refrigerator if its purpose is to extract heat from a cold reservoir. the same engine running backward is called a heat pump if its purpose is to exhaust warm air into the hot reservoir. heat pumps are widely used for home heating. you can think of a heat pump as a refrigerator that is cooling the already cold outdoors and, with its exhaust heat qh, warming the indoors. perhaps this seems a little silly, but consider the following. electricity can be directly used to heat a home by passing an electric current through a heating coil. this is a direct, 100% conversion of work to heat. that is, 19.0 \rm kw of electric power (generated by doing work at the rate 19.0 kj/s at the power plant) produces heat energy inside the home at a rate of 19.0 kj/s. suppose that the neighbor's home has a heat pump with a coefficient of performance of 4.00, a realistic value. note: with a refrigerator, "what you get" is heat removed. but with a heat pump, "what you get" is heat delivered. so the coefficient of performance of a heat pump is k=qh/win. an average price for electricity is about 40 mj per dollar. a furnace or heat pump will run typically 200 hours per month during the winter. what does one month's heating cost in the home with a 16.0 kw electric heater? what does one month's heating cost in the home of a neighbor who uses a heat pump to provide the same amount of heating?
Answers: 2
image
Physics, 22.06.2019 13:10, pearlvldz
The atoms in a nickel crystal vibrate as harmonic oscillators with an angular frequency of 2.3 × 1013 rad/s. the mass of a nickel atom is 9.75 × 10-26 kg. what is the difference in energy between adjacent vibrational energy levels of nickel? (h = 6.626 × 10-34 j • s, , 1 ev = 1.60 × 10-19 j)
Answers: 2
image
Physics, 23.06.2019 00:30, smartie80
Why does the equilibrium position of the spring change when a mass is added to the spring? will the mass oscillate around the new equilibrium position of the spring or the previous position without a mass attached to the spring? if the equilibrium position of the spring changes by 20 cm (assuming no initial mass) when a mass is added to the spring with constant 4.9 kg/s^2, what is the mass of the object attached to the spring?
Answers: 1
image
Physics, 23.06.2019 06:00, student0724
The buildup of charges on an object is called
Answers: 1
Do you know the correct answer?
On a unicast transmission, a transmitter and receiver have latency settings of 0.25 msec and 1.00 ms...

Questions in other subjects:

Konu
Mathematics, 18.02.2021 14:00
Konu
Mathematics, 18.02.2021 14:00