A3.00-m rod is pivoted about its left end. a force of 7.80 n is applied perpendicular to the rod at a distance of 1.60 m from the pivot causing a ccw torque, and a force of 2.60 n is applied at the end of the rod 3.00 m from the pivot. the 2.60-n force is at an angle of 30.0o to the rod and causes a cw torque. what is the net torque about the pivot?

An aircraft performs a maneuver called an "aileron roll." during this maneuver, the plane turns like a screw as it maintains a straight flight path, which sets the wings in circular motion. if it takes it 35 s to complete the circle and the wingspan of the plane is 11 m, what is the acceleration of the wing tip

The momentum of an isolated system is conserved a) only in inelastic collisions. b) only in elastic collisions. c) in both elastic and inelastic collisions

1134567 a jet with mass m = 1.1 ă— 105 kg jet accelerates down the runway for takeoff at 2 m/s2. 1) what is the net horizontal force on the airplane as it accelerates for takeoff? 2.2*10^5 n your submissions: 2.2*10^5 computed value: 220000submitted: saturday, january 26 at 2: 41 pm feedback: correct! 2) what is the net vertical force on the airplane as it accelerates for takeoff? 0 n your submissions: 0 computed value: 0submitted: saturday, january 26 at 2: 41 pm feedback: correct! 3) once off the ground, the plane climbs upward for 20 seconds. during this time, the vertical speed increases from zero to 21 m/s, while the horizontal speed increases from 80 m/s to 95 m/s. what is the net horizontal force on the airplane as it climbs upward? n 4) what is the net vertical force on the airplane as it climbs upward? n 5) after reaching cruising altitude, the plane levels off, keeping the horizontal speed constant, but smoothly reducing the vertical speed to zero, in 13 seconds. what is the net horizontal force on the airplane as it levels off? n 6) what is the net vertical force on the airplane as it levels off?