Physics
Physics, 13.12.2019 04:31, smithad242

Amotor was overheating because of low voltage at its terminals. a transformer was installed to correct the problem. what is the secondary voltage of the transformer required to supply 240 volts to the motor? (round the final answer to one decimal place.)

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 10:30, zoebtharpe
An insulated 40 ft^3 rigid tank contains air at 50 psia and 120°f. a valve connected to the tank is now opened, and air is allowed to escape until the pressure inside drops to 25 psia. the air temperature during this process is kept constant by an electric resistance heater placed in the tank. determine the electrical work done during this process.
Answers: 2
image
Physics, 22.06.2019 12:00, angelamirga332
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
image
Physics, 22.06.2019 22:30, harlon852
An alarm clock has a current of 4.5 amps and a resistance of 3.2 ohms. what is the voltage in the circuit? a.1.4 volts b.0.71 volts c.14 volts d.46 volts
Answers: 2
image
Physics, 23.06.2019 00:40, maggie2018
Researchers conducted an experiment to identify the effects of three different hand sanitizers on the growth of bacteria. the researchers grew one type of bacteria in twenty-four identical covered petri dishes. then, they opened eighteen petri dishes and applied the three hand sanitizers to six petri dishes each. they left the remaining six petri dishes closed as a control group. when the researchers measured the growth of bacteria two days later, the six dishes that had no hand sanitizer showed the least amount of bacterial growth. the researchers concluded that not using any hand sanitizer would lead to the least bacterial growth. which statement best explains why the researchers’ conclusion was not justified? the experiment tested too many variables. the control group was not treated the same as the experimental group. the sample size of twenty-four petri dishes is not large enough. the single type of bacteria is not adequate to make any conclusions.
Answers: 1
Do you know the correct answer?
Amotor was overheating because of low voltage at its terminals. a transformer was installed to corre...

Questions in other subjects:

Konu
Mathematics, 09.07.2019 00:00