Physics, 06.12.2019 01:31, cottoncandy465

Block 1 has mass m1= 460 g, block 2 has mass m2= 500 g, and the pulley, which is mounted on a horizontal axle with negligible friction, has radius r= 5.00 cm. when released fromrest, block 2 falls 0.750 m in 5.00 s without the cord slipping on the pulley.

Answers: 3

Show answers

Answers

answered: jjdj5218

a. a=0.06m/s^2

b. T1 = 4.62N

c. T2 = 4.97N

d. $\alpha=1.20rad/s^2$

e. I = 0.0146 kg.m^2

Explanation:

This question is incomplete. The original question was:

Block 1 has a mass m1 = 460 g, block 2 has mass m2 = 500 g, and the pulley, which is mounted on a horizontal axle with negligible friction,

has radius R = 5.00 cm. When released from rest, block 2 falls 0.750 m in 5.00 s without the cord slipping on the pulley.

(Do not treat the pulley as a uniform disk. Give your answers to three significant figures. Use these rounded values in subsequent calculations.)

a. What is the magnitude of the acceleration of the blocks?

b. What is the tension in the rope on block 1?

c. What is the tension in the rope on block 2?

d. What is the magnitude of the pulley's angular acceleration?

e. What is the rotational inertia?

We will use kinematics to calculate the acceleration of the blocks:

Y=Vo*t-1/2*a*t^2

Where Y=-0.75m; Vo = 0m/s; t = 5.00s

Solving for a:

a=-0.06m/s^2 The magnitude of the acceleration is and the acceleration of each block is

a1=0.06m/s^2 ; a2=-0.06m/s^2

By making a sum of forces on the block 1:

T1-m1*g=m1*a1 Solving for T1 and using g=10m/s^2 :

T1 = 4.62N

By making a sum of forces on the block 2:

T2-m2*g=m2*a2 Solving for T2 and using g=10m/s^2 :

T2 = 4.97N

Angular acceleration is given by:

$\alpha=a/R=1.2rad/s^2$

By making a sum of torques on the pulley, we get the inertia:

$T1*R-T2*R=-I*\alpha$ Solving for I:

$I=\frac{-R*(T1-T2)}{\alpha}$

I=0.0146kg.m^2

answered: leahandmaryssa

a) $\rm a_1 = 0.06\;m/sec^2\;\;and \;\; a_2 = - 0.06\;m/sec^2$

b) $\rm T_1 = 4.62\;N$

c) $\rm T_2 = 4.97\;N$

d) $\rm \alpha = 1.2 \;rad/sec^2$

e) $\rm I = 0.0146\;Kg.m^2$

Given :

Mass, $\rm m_1 = 460\;g$

Mass, $\rm m_2 = 500\;g$

Radius, R = 5 cm

When released from rest, block 2 falls 0.750 m in 5 sec without the cord slipping on the pulley.

Solution :

We know that,

$\rm S = ut + \dfrac{1}{2}at^2$

Now put the values of u, S and t and solve for a we get,

$\rm -0.75 = 0 +\dfrac{1}{2}a(5^2)$

$\rm a = -0.06\;m/sec^2$

So, acceleration of each block is,

$\rm a_1 = 0.06\;m/sec^2\;\;and \;\; a_2 = - 0.06\;m/sec^2$

Now for block 1,

$\rm T_1-m_1g = m_1a_1$ ----- (1)

Now put the values of $\rm a_1,\;m_1\;and\;g$ in equation (1),

$\rm T_1 = 4.62\;N$

Now for block 2,

$\rm T_2-m_2g = m_2a_2$ ----- (2)

Now put the values of $\rm a_2,\;m_2\;and\;g$ in equation (2),

$\rm T_2 = 4.97\;N$

Now for angular acceleration,

$\rm \alpha = \dfrac{a}{R}$

$\rm \alpha = 1.2 \;rad/sec^2$

Now sum of torques on the pulley is,

$\rm T_1R-T_2R = -I\alpha$

$\rm I = \dfrac{R(T_2-T_1)}{\alpha }$

$\rm I = 0.0146\;Kg.m^2$

For more information, refer the link given below

link

answered: Guest

force is mass*acceleration.

we have a very small mass: 11.4*0.001 kg

if we want 0.035n of force, we need an acceleration:

0.035 = 11.4*0.001*a

a = 0.035/(11.4*0.001) m/s^2

answered: Guest

when two balls of the different masses are dropped from equal height, they reach the ground at the same time .this is because they experience the same acceleration.

the acceleration is independent of mass.

thus when they are dropped they will always maintain the same velocity and travel the same distance (neglect air resistance of course) at the same time.

Other questions on the subject: Physics

Physics, 21.06.2019 15:50, daemonacoster

The metal wire in an incandescent lightbulb glows when the light is switched on and stops glowing when it is switched off. this simple process iswhich kind of a change? a. a physical changeb. a chemical changec. a nuclear changed. an ionic change

Answers: 1

continue

Physics, 21.06.2019 16:30, ericuh

Which statement best describes resistance? resistance is a. how well a current will flow in a material and is measured in volts. b. how well a material conducts an electrical charge and is measured in ohms. c. the ability of a material to attract a positive charge to create a current. d. the ability of a material to repel neutral charges and is measured in ohms.

Answers: 3

continue

Physics, 22.06.2019 01:30, kadinmorgan

In a thunderstorm, charge builds up on the water droplets or ice crystals in a cloud. thus, the charge can be considered to be distributed uniformly throughout the cloud. for the purposes of this problem, take the cloud to be a sphere of diameter 1.00 kilometer. the point of this problem is to estimate the maximum amount of charge that this cloud can contain, assuming that the charge builds up until the electric field at the surface of the cloud reaches the value at which the surrounding air breaks down. this breakdown means that the air becomes highly ionized, enabling it to conduct the charge from the cloud to the ground or another nearby cloud. the ionized air will then emit light due to the recombination of the electrons and atoms to form excited molecules that radiate light. in addition, the large current will heat up the air, resulting in its rapid expansion. these two phenomena account for the appearance of lightning and the sound of thunder. take the breakdown electric field of air to be eb=3.00ă—106n/c. part a estimate the total charge q on the cloud when the breakdown of the surrounding air is reached. express your answer numerically, to three significant figures, using ďµ0=8.85ă—10â’12c2/(nâ‹…m2) .

Answers: 2

continue

Physics, 22.06.2019 01:30, ctomo2004

Ababy stroller is a rest on top of a hill which is 10 m high. the stroller and baby have a mass of 20 kg. what is the potential energy of the baby and stroller?

Answers: 1

continue

Do you know the correct answer?

Block 1 has mass m1= 460 g, block 2 has mass m2= 500 g, and the pulley, which is mounted on a horizo...