Physics, 03.12.2019 23:31, ynclankaedon

Achip measuring 5 mm 5 mm is placed flush on a flat plate 18 cm from the leading edge. the chip is cooled by air at 17oc flowing with a velocity of 56 m/s. determine the maximum power that can be dissipated in the chip if its surface temperature is not to exceed 63oc. assume no heat loss from the back side of the chip.

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 10:20, brandon1888

Asmall object with mass 0.200 kg swings back and forth on the lower end of a light rope that is 3.00 m long. the upper end of the rope is attached to the ceiling. as the object swings through its lowest position, where the rope is vertical, the speed of the object is 5.80 m/s. at this point in the motion, what is the tension in the rope? (use g = 9.80 m/s2.)

Answers: 2

continue

Physics, 22.06.2019 12:00, shrinu

Selma made a diagram to compare convection and radiation. which label belongs in the area marked x? must involve temperature differences between substances or objects only occurs when molecules are in direct contact involves the movement of fluids based on density differences can occur where there is little or no matter

Answers: 1

continue

Physics, 22.06.2019 13:50, Geo777

Two students, each riding bicycles, start from the same apartment building and ride to the same building on campus, but each takes a different route. the first student rides 1100 m due east and then turns due north and travels another 1430 m before arriving at the destination. the second student heads due north for 1930 m and then turns and heads directly toward the destination. at the turning point, how far is the second student from the destination?

Answers: 3

continue

Physics, 22.06.2019 15:00, hma9153

Amoving company collects data about couches they move and displays the data in a table. the force along the ramp, the angle of the ramp, and the height the couch is raised to are shown. which statements correctly compare the work done to move the couches? check all that apply. the same amount of work is done for couches 1 and 3. the same amount of work is done for couches 2 and 3. the work for couch 1 is greater than the work for couch 2. the work for couch 2 is less than the work for couch 3. the work for couch 3 is greater than the work for couch 1. the work for couch 2 is greater than the work for couch 1.

Answers: 1

continue

Do you know the correct answer?

Achip measuring 5 mm 5 mm is placed flush on a flat plate 18 cm from the leading edge. the chip is c...