Physics
Physics, 02.12.2019 18:31, jameanch7182

You would like to build a custom speaker system for your cell phone. the signals from the headphone jack are gnd, left channel, and right channel. you find a speaker test tone app that send a constant tone to each channel. turning the volume to its maximum setting, you measure the voltage between the left channel and gnd to be 2 v. you see a similar voltage when you measure between the right channel and gnd. you will be connecting the left channel to an 8ω, 50 watt speaker. you will connect the right channel to another 8ω, 50 watt speaker. connecting the right or left channel, at maximum volume, directly to a speaker only gives: p space equals v squared over r equals 2 squared over 8 equals 500 space m w of power. in a 50 watt speaker, this isn't enough power to move the diaphragm (no sound). assuming we want the speaker voltage to be in-phase with the phone voltage and we want 50 watts of power at maximum cell phone volume, what amplifier topology, gain, and power rails would be required for each channel?

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 20:30, dthompson365
Ahorizontal wire is tied to supports at each end and vibrates in its second-overtone standing wave. the tension in the wire is 5.00 n, and the node-to-node distance in the standing wave is 6.28 cm. (a) what is the length of the wire? (b) a point at an anti- node of the standing wave on the wire travels from its maximum upward displacement to its maximum downward displacement in 8.40 ms. what is the wire's mass?
Answers: 3
image
Physics, 21.06.2019 20:30, PrincessIndia
3. on your graph, the data points between the black squares are data for elements with atomic numbers 3 through 9. locate these elements on your periodic table. what term or description would you use to identify these elements with respect to the periodic table?
Answers: 2
image
Physics, 22.06.2019 03:30, amy1983
What elements are found in the inner and out core of the earth? the correct layers of earth's interior from the top to the center? what is the unwanted material that is removed from a mine called? how much stronger is an earthquake that registers 5 on the richter as opposed to 2? what occurs at a convergence plate boundary? the majority of the the earth's rock what is the most common element found in the earth's crust? what element is found in pyrite that contributes to acid mine drainage? why must mining companies post bond prior to permitting? how are bacteria being used in treating effluent from mines? what is a problem of acid mine drainage in rivers and soils? what do tectonic plates move on? why is gold smelting so damaging? how are artesian wells formed? where is dammed water colder than the river it flows into? what is one of the problems of uncontained aqueducts? what is the largest use of industrial water? underground sand and gravel formations that can store water? what type of water test measure acidity? which type of water test for cloudiness from suspended solids? what water test measures the amount of calcium and magnesium? these are all problems of coal power plants all of the following are advantages of riparian lands along rivers what type of water would be the warmest and have the least amount of dissolved oxygen? the zone of aeration is
Answers: 1
image
Physics, 22.06.2019 06:40, PerfectMagZ
Alinearly polarized electromagnetic wave has an average intensity of 196 w/m^2. this wave is directed towards two ideal polarizers (in real polarizers, transmission is also effected by reflection and absorption). polarizer a is oriented with its transmission axis at an angle of θ_1=20.8∘ with the incident electric field. polarizer b has its axis at an angle of θ_2=63.0∘ with the incident electric field. what is the average intensity of the wave after it passes through polarizer a? what is the average intensity of the wave after it passes through polarizer b? suppose that the two polarizers a and b are interchanged. what would the average intensity be after passing through both polarizers?
Answers: 2
Do you know the correct answer?
You would like to build a custom speaker system for your cell phone. the signals from the headphone...

Questions in other subjects: