Anickel engine part is coated with sic to provide corrosion resistance at high temperatures. if no residual stresses are present in the part at 20°c, determine the thermal stresses that develop when the part is heated to 1000°c during use. the elastic modulus of sic is 60 × 106 psi. the coefficient of thermal expansion for sic is 4.0 x 10-6 / °c. if the sic goes past a tensile strength 25,000 psi, the coating will crack. does the thermal stress go over 25,000 psi?

Iassume the answer is 75 feet. inwards to outwards rather than outwards to inwards. probably be 75.hachures are stokes drawn in direction of the steepest slope. a series of short parallel lines drawn on a map to indicate topographic relief. it is actually called hachures on contour lines. the small marks in the center of the feature are called hachures.observe the picture attached

Answer: 1.4 seconds which is the third optionexplanation: current is defined as the flow of charge per timetherefore, the equation that relates current, charge and time can be expressed as follows: i = δq / δtwhere: i is the current given = 1.8 ampereδq is the charge given = 2.5 coulombδt is the time required for the flow of the given charges to give the 1.8 ampere.substitute with the givens in the above equation to get the time as follows: 1.8 = 2.5 / δtδt = 2.5 / 1.8 = 1.38888 which is approximately 1.4 secondshope this was !