Physics, 27.11.2019 06:31, windmadness5331

A10 g particle undergoes shm with an amplitude of 2.0 mm and a maximum acceleration of magnitude 8.0 multiplied by 103 m/s2, and an unknown phase constant ) what is the period of the motion? 1 s(b) what is the maximum speed of the particle? 2 m/s(c) what is the total mechanical energy of the oscillator? 3 j(d) what is the magnitude of the force on the particle when the particle is at its maximum displacement? 4 n(e) what is this force when the particle is at half its maximum displacement? 5 n

Answers: 3

Show answers

Answers

answered: jonmorton159

a) T=0.0031416s

b) $v_{max}=6.283\frac{m}{s}$

c) E=0.1974J

d) F=80N

e) F=40N

Explanation:

1) Important concepts

Simple harmonic motion is defined as "the motion of a mass on a spring when it is subject to the linear elastic restoring force given by Hooke's Law (F=-Kx). The motion experimented by the particle is sinusoidal in time and demonstrates a single resonant frequency".

2) Part a

The equation that describes the simple armonic motion is given by $X=Acos(\omega t +\phi)$ (1)

And taking the first and second derivate of the equation (1) we obtain the velocity and acceleration function respectively.

For the velocity:

$\frac{dX}{dt}=v(t)=-A\omega sin(\omega t +\phi)$ (2)

For the acceleration

$\frac{d^2 X}{dt}=a(t)=-A\omega^2 cos(\omega t+\phi)$ (3)

As we can see in equation (3) the acceleration would be maximum when the cosine term would be -1 and on this case:

$A\omega^2=8x10^{3}\frac{m}{s^2}$

Since we know the amplitude A=0.002m we can solve for $\omega$ like this:

$\omega =\sqrt{\frac{8000\frac{m}{s^2}}{0.002m}}=2000\frac{rad}{s}$

And we with this value we can find the period with the following formula

$T=\frac{2\pi}{\omega}=\frac{2 \pi}{2000\frac{rad}{s}}=0.0031416s$

3) Part b

From equation (2) we see that the maximum velocity occurs when the sine function is euqal to -1 and on this case we have that:

$v_{max}=A\omega =0.002mx2000\frac{rad}{s}=4\frac{m rad}{s}=4\frac{m}{s}$

4) Part c

In order to find the total mechanical energy of the oscillator we can use this formula:

$E=\frac{1}{2}mv^2_{max}=\frac{1}{2}(0.01kg)(6.283\frac{m}{s})^2=0.1974J$

5) Part d

When we want to find the force from the 2nd Law of Newton we know that F=ma.

At the maximum displacement we know that X=A, and in order to that happens $cos(\omega t +\phi)=1$ , and we also know that the maximum acceleration is given by::

$|\frac{d^2X}{dt^2}|=A\omega^2$

So then we have that:

$F=ma=mA\omega^2$

And since we have everything we can find the force

$F=ma=0.01Kg(0.002m)(2000\frac{rad}{s})^2 =80N$

6) Part e

When the mass it's at the half of it's maximum displacement the term $cos(\omega t +\phi)=1/2$ and on this case the acceleration would be given by;

$|\frac{d^2X}{dt^2}|=A\omega^2 cos(\omega t +\phi)=A\omega^2 \frac{1}{2}$

And the force would be given by:

$F=ma=\frac{1}{2}mA\omega^2$

And replacing we have:

$F=\frac{1}{2}(0.01Kg)(0.002m)(2000\frac{rad}{s})^2 =40N$

answered: Guest

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

answered: Guest

Earthplanet yplanet y5=earth *many different equationsplanet x1.5=earthplanet x is two times planet yobject 5,2500 mass5,1,3,2,4object 1 is four times obect 4

Other questions on the subject: Physics

Physics, 22.06.2019 04:30, leilaford2003

Afeather of mass 0.001 kg falls from a height of 2 m. under realistic conditions, it experiences air resistance. based on what you know about friction, what can you say about the kinetic energy of the feather as it reaches the ground? acceleration due to gravity is g = 9.8 m/s2. a. ke < 0.0196 j b. ke = 00196 j c. je = 0 j d. ke > 0.0196 j

Answers: 1

continue

Physics, 22.06.2019 07:20, MannyBanko1350

If the ama of the inclined plane below is 2, calculate the ima and efficiency. ima = efficiency =

Answers: 1

continue

Physics, 22.06.2019 11:00, kylieweeks052704

A0.580-kg rock is tied to the end of a string and is swung in a circle with a radius of 0.500 meters. the velocity of the rock is 4.50 m/s. what is the centripetal force acting on the rock? 15.5 n 5.22 n 69.8 n 23.5 n

Answers: 1

continue

Physics, 22.06.2019 14:40, kellypechacekoyc1b3

Asolid cylinder and a cylindrical shell have the same mass, same radius, and turn on frictionless, horizontal axles. the cylindrical shell has light-weight spokes connecting the shell to the axle. a rope is wrapped around each cylinder and tied to blocks of equal masses that are held the same height above the ground. both blocks are released simultaneously. the ropes do not slip. which block hits the ground first? or is it a tie?

Answers: 3

continue

Do you know the correct answer?

A10 g particle undergoes shm with an amplitude of 2.0 mm and a maximum acceleration of magnitude 8.0...