Physics, 24.11.2019 00:31, iyeshaik

Aramp is used to load furniture onto a moving truck. the person does 1240 j of work pushing
the furniture up the ramp, and the ramp does 822 j of work. calculate the efficiency of the
ramp.

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 15:00, Fetty1738

What pressure difference is required between the ends of a 2.0-m-long, 1.0-mm-diameter horizontal tube for 40 c water to flow through it at an average speed of 4.0 m/s?

Answers: 1

continue

Physics, 23.06.2019 00:00, cece3467

The horizontal blue line through the middle of the lens is called the optical axis. as the lamp is moved above or below the axis, keeping the horizontal distance to the center of the lens constant, how does the horizontal distance from the lens to the image change?

Answers: 2

continue

Physics, 23.06.2019 02:50, neshaj

Adielectric-filled parallel-plate capacitor has plate area a = 30.0 cm2 , plate separation d = 9.00 mm and dielectric constant k = 3.00. the capacitor is connected to a battery that creates a constant voltage v = 15.0 v . throughout the problem, use ϵ0 = 8.85x10-12 c2/n. m2 . find the energy u1 of the dielectric-filled capacitor.

Answers: 2

continue

Physics, 23.06.2019 07:00, Fireburntbudder

Your physics assignment is to figure out a way to use electricity to launch a small 6.0-cm-long plastic drink stirrer. you decide that you'll charge the little plastic rod by rubbing it with fur, then hold it near a long, charged wire, as shown in figure p23.56 . when you let go, the electric force of the wire on the plastic rod will shoot it away. suppose you can uniformly charge the plastic stirrer to 10 nc and that the linear charge density of the long wire is 1.0 x10-7 c/m. what is the net electric force on the plastic stirrer if the end closest to the wire is 2.0 cm away?

Answers: 1

continue

Do you know the correct answer?

Aramp is used to load furniture onto a moving truck. the person does 1240 j of work pushing
th...